Index of /downloads/tx09-linux/Release-20100830

	Name	Last modified	Size	Description
	Parent Directory		-
	Changes-U-Boot.txt	2010-09-15 11:29	2.3K
	Developers Manual TongARM - V1 7_September-eng.pdf	2010-09-08 16:00	4.8M
	Readme.txt	2010-09-15 16:45	1.0K
	defconfig	2010-09-15 16:00	44K
	demo-rootfs/	2011-02-05 19:38	-
	linux-tmpa-2.6.34-100903.tar.bz2	2010-09-03 19:10	65M
	openocd-tonga.cfg	2011-02-02 19:55	2.0K
	releasenotes.txt	2010-08-31 18:02	1.9K
	u-boot	2010-09-03 12:47	876K
	u-boot-tmpa-100903.tar.bz2	2010-09-03 19:13	8.6M
	u-boot.bin	2010-09-03 12:47	227K
	u-boot_nand_tonga2.bin	2010-09-03 12:47	355K
	uImage	2010-09-03 16:05	2.1M
	uImage-defconfig.gz	2010-09-15 11:22	10K
	uImage-tonga	2010-09-03 16:05	2.1M

Readme.txt
	This file.

u-boot
	U-Boot ELF format. Suitable for downloading e.g. via JTAG
	(e.g. OpenOCD)

u-boot.bin
	U-Boot raw binary. Suitable for direct RAM execution,
	start address is 0x43f00000

u-boot_nand_tonga2.bin
	U-Boot image to be flashed into NAND flash starting from
	NAND address 0x00 (MTD partition "u-boot")

uImage
uImage-tonga (same as uImage, just for convenience)
	Kernel uImage - flash to "kernel" NAND partition

defconfig
uImage-defconfig.gz
	Kernel configuration of the above pre-compiled uImage - this is
	*not* the tonga defconfig contained in the kernel sourcecode

demo-rootfs/
	directory containing some rootfs-images for demo and test
	purposes, created with uTIB http://www.mucross.com
	can be flashed into "rootfs" MTD partition

openocd-tonga.cfg
	Sample config file for OpenOCD JTAG software using the
	FTDI based USB ARM JTAG interface

Developers Manual TongARM - V1 7_September-eng.pdf
	Full manual for using Linux especially on the Tonga2 platform